Dazzle Instant UV Block

Why:

• Dazzle Instant UV Block stabilizes pool water to prevent chlorine loss from the ultraviolet rays of the sun
• Without stabilizer being present, it would be very difficult to maintain a chlorine residual on a bright sunny day without increasing the amount of chlorine used significantly (more than 6 times as much)
• Stabilizer is also proven to slow the rate of degradation of vinyl liners, allowing them an increased life span in pools 
• The ideal level for stabilizer in a chlorinated, outdoor swimming pool is 30 – 40 ppm
• Once a stabilizer level reaches approx. 30 ppm, no more benefit can be achieved by adding more stabilizer
• There is plenty of confusion surrounding elevated stabilizer levels
  • Once levels reach 100 ppm, it is recommended that the water be diluted with fresh water to lower to <100 ppm
  • There is no effective way to lower stabilizer levels other than to drain water and refill with water that has no stabilizer present (dilution)  

When:

• Dazzle Instant UV Block should be used to raise the stabilizer level any time it is less than 20 ppm
• When stabilized chlorines are used regularly, the stabilizer level is unlikely to ever require topping up
• When unstabilized chlorines are used, or the pool is a salt pool, periodic top-ups are likely to be required based on the amount of water lost to backwashing, draining and splash-out

How Much:

• 330 mls per 10,000 litres will raise stabilizer by 10 ppm
• In a freshly-filled swimming pool, add 1 litre per 10,000 litres to achieve the ideal starting level of approx. 30 ppm 

How: 

• The best application method for Dazzle Instant UV Block is as follows;
  • Shake well and simply pour the required amount around the edges of the pool
  • If any of the product is visible in the pool, use the pool brush to mix it into the water 
  • When the bottle is empty, triple rinse to ensure all the contents have been added
  • Simple and easy – with instant results
• Alternatively, the required amount of product can be poured slowly into the skimmer
  • Backwash or clean the filter prior to applying in this way
  • Do not backwash for 24 hours to ensure all the product has left the filter