This is the heart of the Mineraluxe Hot Tub Care System

Use one Mineraluxe Cube weekly and two at every fresh fill.

Following each fresh fill or when converting to Mineraluxe for the first time:
Apply 2 Mineraluxe Cubes per 2,000 litres (500 gallons) of hot tub water.

On a weekly maintenance basis thereafter:
Apply 1 Mineraluxe Cube per 2,000 litres (500 gallons) of hot tub water.

Add the Mineraluxe Cube directly into the skimmer basket or filter compartment with the high speed pump operating.

For smaller volumes (<1,000 litres/250 gallons) or hot tubs with infrequent use, the dosage may need to be modified to one Mineraluxe Cube every 2 weeks.

For volumes greater than 2,000 litres (500 gallons), apply one additional Mineraluxe Cube for each additional 1,000 litres (250 gallons).

You can choose between the four Mineraluxe Sanitizers; we offer Brominating Granules or Tablets, Chlorinating Granules or Tablets. We recommend Bromine or Chlorine Tablets to make the system as easy as possible.

Applied as often as needed to maintain a sanitizer residual of 3-5 ppm.

Important Note! The Mineraluxe system reduces the quantity of bromine or chlorine required to maintain 3 – 5 ppm so reduce the quantity of tablets or granules being employed accordingly. Check using your test kit or strips!

Test your bromine or chlorine residual and adjust to ensure 3 – 5 ppm.

If needed, fast dissolving Mineraluxe Bromine Granules will instantly establish or boost the bromine level. If you are on a chlorine system, Mineraluxe Stabilized Chlorine Granules will instantly establish or boost your chlorine level when needed.

Once your bromine or chlorine residual is established, apply Mineraluxe Bromine Tablets or Mini Chlorinating Tablets to a floater or alternate feed method to maintain the desired level continuously.